Re: farmall cultivision b

Posted by gene bender on July 30, 2006 at 04:47:07 from (66.43.221.106):

In Reply to: farmall cultivision b posted by david crain on July 29, 2006 at 16:18:31:

Posr the casting codes on the tranny and engine and we can go from there. Does the block have two ribs by the carb running lengthways and are the front wheels tilted back from the pedestal. Long or short oil filter housing. J-shaped hooks on the hood or a slotted hex nut? A guard in front of the belt pulley and what size is the pto shaft. Serial # should begin with the latters FAB.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]