Farmall & IHC Tractors Discussion Board |
International 674 Diesel Rocker Arm Assembly
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Scotty1 on July 27, 2006 at 18:35:19 from (65.110.175.155):
Hi, I have a 674 International Diesel that I have took the head off of this Spring and had the head re-worked. Now I have bolted the head back on with a new head gasket and have a problem with the Rocker Arm Assembly. I made sure the pushrods are down into the lifter with the round end into the lifter but when I bolt down the Rockerarm assembly the rocker arms don't hardly make contact with the values stem or the pushrods .It's like the stands for the rocker arms are too tall. Is there anyway that I may have lost something like caps that set on the end of the value stem to take up some of this clearence that I have. It's been since Spring and things got moved around so I may have lost something ? I have a I&T Shop manual but it ain't much help. Does anyone have a parts view of the value train or can anyone tell me what may be going on ? Thanks for your time and any help. Scotty
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|