|
Farmall & IHC Tractors Discussion Board |
Re: 6 volt / 12 volt?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by John T on July 24, 2006 at 10:13:09 from (66.244.90.5):
In Reply to: 6 volt / 12 volt? posted by Mike CA on July 24, 2006 at 09:55:12:
Mike, Wayyyyyy back in the thirties through the early to mid fifties 6 volts was more or less the standard and used in the automotive and farm tractor industries. For one thing, the tractors had far less lights n accessories and being smaller engines and less compression they could be cranked over fairly well for starting using the common available 6 volt battery of the day. In some instances when 12 volts was first used they simply added two six volt batteries in series. Butttttttttttttt thennnnnnnnn when engines increased in size and compression for more power and all sorts of lights were added, 6 volts became impractical because of the high current demands for starting meaning excess voltage was dropped across battery n starter cables unless enormous sizes of cables were used. At the same load if the voltage is doubled it only takes one-half the current to yield the same watts of power, so cable voltage n heat losses were reduced using 12 volts. Nowwwwwwwww due to old age or wear or improper maintenance or poor choices of wimpy batteries etc., some older 6 volt tractors may not crank as fast or start as well especially at extereme cold temperatures soooooooooo farmers began converting to 12 volts. However, thats NOT original and the so called "Correct Police" may frown lol. Still if one uses big heavy batteries and keeps the engine and ignition in good tune and repair AND USES 00 GAUGE CABLES, a 6 volt tractor ought to start reasonably well. If one uses the tractor and it must start at extreme temperatures, 12 volt conversion is a viable alternative, but if only used for light duty and show n parade use and if originality is a concern, then keep em original I guess. Its your tractor n your choice, hope this helps answer your question. Best wishes n God Bless John T
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
A Farmall Restoration Story - What's Been Done So Far - by Sean Brinston. This is a story of my first real tractor restoration. My name is Sean Brinston and I was 15 almost 16 at the time of this.My neighbour directly across the road who I had helped with hay all the time had this tractor sitiing at his house for what I thought was 6 years. Finally I got the money and courage to ask him. I phoned him and he said it was already sold, eight years ago!
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|