|
Farmall & IHC Tractors Discussion Board |
Re: cold start
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Dean D on July 23, 2006 at 14:19:22 from (142.169.28.210):
In Reply to: Re: cold start posted by Hugh MacKay on July 23, 2006 at 12:12:42:
I have a International 1974 harvester. serial number B9437 . I bought a thing that connects to the bottom raditor hose and you plug it in and its suppose to keep the engine warm. I assume this should work. I also like to know about the gear oil, I checked the hole near the gear shifter, and looked down and see no oil. I don't know if that good or bad thing.. I would like to know how much oil need to go in there, a friend told me its all one unit. the back hydraulic to the front. I'm not sure about this. I had a Massey 35 and it had a dip stick, to check these thing out. I have no operater's manual, for I can't find one in my area, or in Ontario canada. Anyhow let me know about these things , thank for getting back to me. Dean
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
The Mud Daubers and the Old John Deere - by Jon Zehnder. I have a 1941, John Deere Model A tractor I have owned for about a year and a half. This is my first (in case my wife reads this, "FIRST") tractor and it has been a learning experience. After considerable advise and assistance from local tractor nuts and the forums of Yesterday�s Tractors, I had finally got it running pretty well. I have tuned it up, overhauled the carburetor, installed a borrowed, rebuilt magneto, installed a new Power-Trol, patched the radiator, installed new front wheels a
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|