656 3 point onto a 706

Posted by Jim706 on July 23, 2006 at 14:16:19 from (64.33.169.103):

I bought all the 3 point parts that were taken from a 656 and figured I would install them on my 706 gas, looking at the back of my tractor the plate that attaches below and around the pto looks to have a different bolt spacing. This 706 also has two different type pto shafts protruding from the back, the lower being the standard today. Anybody know if this will need to be removed? I haven't started tearing the 2point apart yet, doesn't look like much to take off. But wouldn't want to tear it all off if this 3 point assembly isn't going to fit. Thanks, Jim

Replies:

• Re: 656 3 point onto a 706 Jim706 17:23:46 07/24/06 (0)
• Re: 656 3 point onto a 706 Allan In NE 04:16:47 07/24/06 (0)
• Re: 656 3 point onto a 706 VernMN 02:39:27 07/24/06 (0)
• Re: 656 3 point onto a 706 the tractor vet 18:31:05 07/23/06 (0)
• Re: 656 3 point onto a 706 Allan In NE 17:23:36 07/23/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]