Re: IH 300 pushrod bent HELP

Posted by Magman on July 18, 2006 at 18:52:52 from (67.142.130.32):

In Reply to: IH 300 pushrod bent HELP posted by Mark-Ontario on July 18, 2006 at 17:38:47:

I agree with rusty, Probly had a little rust or stuck valve from sitting and bent the push rod just get another from a junk yard or ebay and clean her up and throw her in and check the gap and make sure the nut is good and tight so it does not loosen and adjust itself on ya.
JON

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]