Farmall H clutch Fingers Question

Posted by farmallwayne on July 09, 2006 at 19:37:06 from (204.111.118.112):

Hello,

I have a farmall H with a horn (new Ideal) loader on it. The tractor runs great but I am having problems with the clutch. When you push the clutch in it won't disengage the clutch all the way. This is a problem that has been getting worse. I have adjusted the linkage all the way. I have adjusted the clutch fingers as far as they will go. It appears the fingers are worn out at the pivot point. There is a lot of slop in them.

My question is, can you replace just the finger on the pressure plate without splitting the tractor

Can the fingers be bought by them self?

Thanks

Replies:

• Re: Farmall H clutch Fingers Question Andy Martin 05:30:17 07/10/06 (0)
• Re: Farmall H clutch Fingers Question Dave S. 20:04:43 07/09/06 (0)
• Re: Farmall H clutch Fingers Question Steven@ND 20:03:43 07/09/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]