Re: 42 H won't start

Posted by GordoSD on July 09, 2006 at 17:10:12 from (66.115.200.140):

In Reply to: 42 H won't start posted by rmthunder on July 09, 2006 at 14:10:37:

That fuel you saw dripping from the caarb inlet hose was a result of the float needle valve not sealing. Fuel overflowed there and also into the engine via the governor.
Check your engine oil it is probably diluted.
Redo the carb float and needle and seat that needle by giving it a very very light tap. Suggest you get a new one.
If after cranking for a few times and those plugs are still dry, you have the float assembly afu and it won't allow any fuel to pass.
You are on the right track here. In the future, ALWAYS-ALWAYS-ALWAYS shut off the fuel at the strainer bowl.

Gordo

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]