Re: 1466 Hydraulic Problems

Posted by JJK on July 08, 2006 at 22:51:06 from (216.189.131.188):

In Reply to: 1466 Hydraulic Problems posted by Brian T from OH on July 08, 2006 at 21:02:51:

Does your control lever have a lot of slop or free play in it? Possible that the spool isn't reaching its full stroke why it will raise and not lower. Lowering the disc shouldn't take any power to do so I don't suspect the relief valve. Are you using the IH couplers or Pioneer's with the adaptors? Could be that there's to much pressure in the hose that the tip won't open up and release until the line is cracked loose to relieve the pressure. Might be why the 706 won't lower the disc after the 1466 raised it. I'm kinda guessing this without knowing exactly how the hydraulics are acting when it is working. Are they normal, slow, things like that.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]