|
Farmall & IHC Tractors Discussion Board |
Re: Farmall H carb and tires
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by todd in michigan on July 08, 2006 at 19:12:38 from (24.247.247.179):
In Reply to: Farmall H carb and tires posted by H fanatic on July 08, 2006 at 15:00:51:
You need a good set of manuals. you can start here and download the parts manual here free. THe idle jet small screw with a spring towards the top and the main jet is the big screw at the bottom with the spring. A good starting point of reference for your carb is "The idle mixture screw (idle jet)is set at 1 1/2 turns out. The load mixture screw (main jet) is set at 3 turns out." so tighten your jets down slowly and count how many turns to get to the bottom and then see how far off the reference point you are. 3 turns out is a starting point, fine tune from there.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
The Mud Daubers and the Old John Deere - by Jon Zehnder. I have a 1941, John Deere Model A tractor I have owned for about a year and a half. This is my first (in case my wife reads this, "FIRST") tractor and it has been a learning experience. After considerable advise and assistance from local tractor nuts and the forums of Yesterday�s Tractors, I had finally got it running pretty well. I have tuned it up, overhauled the carburetor, installed a borrowed, rebuilt magneto, installed a new Power-Trol, patched the radiator, installed new front wheels a
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
