Re: Help Me Think

Posted by pcy1066 on July 08, 2006 at 07:58:15 from (209.143.36.142):

In Reply to: Help Me Think posted by Allan In NE on July 08, 2006 at 06:09:53:

if its a combine motor behind your alt at the top front of the block there is a flat spot that will have the motor info stamped in it, if its a tractor its beside the oil filter, if its a 301 it dont have sleves so there is no sleve grove at the top of the block for the gasket to seal against, quick cure get a mach shop to cut a grove in the head and put some 30 thsnds piana wire in it, depending on were yore valves are its possible for air to transfer between cylinders with the motor shut off however turning the motor shud send the air elsewere

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]