Farmall & IHC Tractors Discussion Board |
Re: 51 H wireing
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Ed from Mason, MI on July 06, 2006 at 08:06:02 from (24.56.192.37):
In Reply to: Re: 51 H wireing posted by Peabody on July 06, 2006 at 07:15:00:
On the wireing I have looked at it again this morning.Please keep in mind all of the wireing on this H is original from the factory no add on's. When I brought the tractor home the only thing that was wrong on it is the lights did not work I fixed the ground in the light housings & replaced the fuse housing & fuse in the electrical box. Doing this I made the lights work. How ever the when I did bring it home I power washed the chicken poo off it from having it sit in a barn for the last 10-15 years. So I know a lot of the wireing harness is very touchy & brittle. The only things on the wireing system that are not original are the battery terminals, battery & the fuse housing in the insterment box. Is it possible that the fuse wires need to be place in another order ? or am I missing the junction box ? do to the missing junction box & having an over abundance of wireing going to the ammeter the problem? I talked to the old owner of the tractor & he said that all of the wireing is original, However he did say that when the lights stopped working his dad changed the placement of some wires in the box. So like I said could I have done something backwards when I replaced the fuse housing with out the junction box in it, Looking at the box it would appere that one was once there but not now. Could these two items be my undoing. Thank you for all of your time. Take care. Ed
Replies:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|