Re: Magneto timing question

Posted by Bob/Ont on July 05, 2006 at 05:53:51 from (172.144.192.47):

In Reply to: Magneto timing question posted by spray004 on July 05, 2006 at 05:29:41:

My W4 manual says to set the engine on TDC mark and with the mag bolts loose rotate the mag untill it clicks then tighten up the bolts. The impulse coupling holds the mag rotation untill you are over TDC then it lets go so it will always end up past the mark as you say when it stops. Be very carefull the first time you crank it after adjusting. If you get it advanced and it lets go before TDC it will spin the crank back at you and that Hurts.
Later Bob

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]