Re: New Wheel Problems

Posted by the tractor vet on June 24, 2006 at 19:48:45 from (66.202.111.189):

In Reply to: New Wheel Problems posted by MAGMAN on June 24, 2006 at 16:25:11:

Need to break down the tires and remove the tubes and make up a couple blocks and drill to 3/4 inch holes in the block and PLUG WELD THEM to the new rims this way they will not slip thru if ya ever pull a heay load and get full traction she will slip wright thru the wedeges . I do not remember if we used 1/2 inch thick stock on the last ones i did several years back or if it was thicker and i used the press to bend it a bit so it would lay in the rim had to play with it to get the contour .

Replies:

• Re: New Wheel Problems Janicholson 20:05:58 06/24/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]