Re: What size U Bolts to connect H fenders??

Posted by Don L C on June 21, 2006 at 20:22:50 from (24.166.244.128):

In Reply to: What size U Bolts to connect H fenders?? posted by CharleyFarmall on June 21, 2006 at 18:58:12:

Bolting the finders directly to the housing puts the finders close to the seat.....making it hard to get on and off....they make extender plates or you can make your oun, using 7/16" flat stock as wide as the finder mount and long enough to put the finder out even with the housing.....also cut 1" pieces of (i think) pipe to put under the plate on (on each bolt) the inside to hold the plate up off the housing....bolt finders directly to outer end of plate......thats what I am going to do on my M .......hope this helps Don

Replies:

• Re: What size U Bolts to connect H fenders?? Michael Soldan 04:53:19 06/22/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]