Re: Farmall 300 wheels

Posted by Dave Slater on June 20, 2006 at 07:55:23 from (205.188.116.133):

In Reply to: Farmall 300 wheels posted by wshank0101 on June 19, 2006 at 15:58:37:

Not counting power adjust,steel and large axle 2 3/4 size wheels they were 3 types of wheels used on farmall 300 tractors. First type on early tractors were like H,SH with 6 clamps to rim. Next was the 8 clamps to rim with cast in key.Last and also used on 350 was the 8 clamp to rim wheel with keyway machined in it and a seperate key used.Have found a few of the cast in key wheels that were repaired by making the key slot in wheel and using the seperate key like later wheels. Don't know what they cut keyway with,they done a nice job.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]