Re: Gene Bender/Help Question

Posted by CNKS on June 13, 2006 at 17:27:59 from (204.249.178.138):

In Reply to: Re: Gene Bender/Help Question posted by Retired 05 in VA on June 13, 2006 at 15:04:14:

I don't know. I have 3 of those units, none have the holes, hard to imagine cast rusting through, or a defect in manufacturing either. Mine do have several places with Allen head screws in them, but you said pinholes. I suppose they can be welded. If they are not under much pressure, you can drain the reservoir, clean it up as best you can, and try JB Weld -- people have fixed engine blocks with it, but the hydraulics will have much more pressure. If Gene doesn't answer, ask again, he is usually around.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]