Re: H Rod Bearings

Posted by Bob on June 13, 2006 at 08:08:53 from (64.21.249.40):

In Reply to: Re: H Rod Bearings posted by KansasBri on June 13, 2006 at 08:03:09:

If the rod bearing is bad, most likely the crankshaft journal is bad, and the engine needs to be torn down and the crankshaft reground, if you want a repair that will last.

If, by some odd chance the crank is acceptable, you need to determine what size it is... standard, or an "undersize".

The old bearing insert will be stamped on the backside with "STD", ".001", ".010", ".020", etc.

Also, the journal can (and should be) checked with a micrometer for size, and "out of round".

Replies:

• Re: H Rod Bearings KansasBri 08:16:06 06/13/06 (4)
  • Re: H Rod Bearings Andy Martin 08:48:00 06/13/06 (3)
    • Re: H Rod Bearings KansasBri 11:56:28 06/13/06 (2)
      • Re: H Rod Bearings Andy Martin 13:05:40 06/13/06 (1)
        • Re: H Rod Bearings KansasBri 05:43:15 06/15/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]