Re: 350 Diesel injection pump

Posted by THE TRACTOR VET on June 05, 2006 at 16:57:46 from (66.202.111.180):

In Reply to: 350 Diesel injection pump posted by Superman on June 05, 2006 at 15:17:17:

That can be a DIY , just make sure that you have the engine at TDC and also remove the littel plate on the side of the injection pump and amke sure that the lines line up there and remove all lines and remove the pump and DO NOT TURN IT also wire back the throttel shaft into the full fuel posision this will hold the govener weights in place. When you replace the two lip seals make sure that they are done correctly and becareful not to roll the one when going back together and get new copper washers for the lines and don't over tighten them as you can twist them off.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]