Farmall 656 brakes---HELP!

Posted by RDC on May 28, 2006 at 05:48:12 from (204.10.160.15):

I was replacing the brakes on my neighbor's 656 last night and ran into an unusual problem. After I cleaned all the wear surfaces and installed new actuator balls and new brake discs I am not able to install the outside cover because the combined thickness or the discs and actuator is so much that I lack approx. 3/8 inch of being able to bolt the cover on flush. I'm stumped! I've done this many times on older disc brake tractors (Super M thru 560) and never had trouble like this. Anyone have any ideas?

Replies:

• Re: Farmall 656 brakes---HELP! pcy1066 06:01:48 05/28/06 (2)
  • Re: Farmall 656 brakes---HELP! RDC 04:14:46 05/29/06 (0)
  • Re: Farmall 656 brakes---HELP! Allan In NE 06:35:38 05/28/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]