Re: Clutch swap in a H

Posted by RustyFarmall on May 27, 2006 at 12:52:34 from (199.120.81.202):

In Reply to: Re: Clutch swap in a H posted by Nat 2 on May 27, 2006 at 12:24:04:

Nat, you need to get some tractor manuals and study this subject a little. The pressure plate and clutch disc are a unit, yes, they are two separate pieces, but the pressure plate is what holds the clutch disc in, the pressure plate has to come out before you can get to the clutch disc. The input shaft from the clutch to the transmission can be unbolted, and completely removed. Thus the entire clutch and pressure plate can be swapped out without splitting the tractor. The only thing that cannot be removed is the flywheel, and it could probably be wiggled out also but it is too heavy to try and do that.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]