Re: valve settings, head torque and loader of an H

Posted by River Bottom Farmer on May 16, 2006 at 18:20:02 from (205.188.116.133):

In Reply to: valve settings, head torque and loader of an H posted by Guyzoo on May 16, 2006 at 17:47:38:

head bolt torque is 80 to 85 pounds and valve lash is 17 thousandths cold.retorque head bolts and readjust valves after running engine up to temp.Repeat this 3 to 4 times to get head properly torque down.....Hope this helps RBF

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]