Old Case Hydraulics

Posted by Dellbertt on April 29, 2006 at 10:20:35 from (204.39.210.245):

Never had to dig into the Case before.

Does anyone know why my Case 1030 has no lifting power to the cylinder on the plow.

It will go up and down in the freeplay to the stop but when it gets to lifting the plow it stops.

It also will not stick in up or down like it should. I have to hold it fore or back.

Fluid is ok.

Something is stuck open or closed?

Replies:

• Re: Old Case Hydraulics Dellbertt 15:09:32 04/29/06 (0)
• Re: Old Case Hydraulics El Toro 10:43:45 04/29/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]