Re: Firecrater piston questions

Posted by ChadS on April 14, 2006 at 07:18:51 from (66.228.96.144):

In Reply to: Re: Firecrater piston questions posted by the tractor vet on April 13, 2006 at 18:14:41:

Watch the piston to head clearence on this setup,,, I dont know about the H kit with firecraters, but the Super H with firecraters,, with the older H gas heads, the pistons hit the head. I had to grind a section out of the combustion chamber on the manifold side, to a replica of the SH-350 head compression chamber. There is plenty of meat to remove in this area, it dont take much, maybe a swipe about 3/4 inch wide, and at an angle. You can do it with a 4 inch hand grinder. If you have trouble with it, I have pictures of what I have done to make it work. Just hollar back, will email, or post it here. Chad

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]