Re: 300U or 350U

Posted by Janicholson on April 12, 2006 at 06:44:04 from (199.17.6.175):

In Reply to: Re: 300U or 350U posted by Ben in IN on April 12, 2006 at 05:26:49:

The serial Number will tell you for sure. Look left on this page and the issue is solved. The block will also have an engine casting # on it that are different between the two, or if it has had a different engine placed in it. The 350 had a ignition key below a round rubber start push button.
The 300 was different. 350 had draft control and a "D" shaped notched handle on the left side of the seat to control the traction downforce. 300s did not (I believe)
JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]