Re: 300U or 350U

Posted by TDK on April 11, 2006 at 17:40:22 from (205.188.116.133):

In Reply to: 300U or 350U posted by Ben in IN on April 11, 2006 at 09:21:35:

There are a few differences in the 300/350U tractors. Although any of these could have been added or changed, I'll give you a few items. The 300 had a C-169 engine, the 350 a C- 175. Casting codes are on most of the large castings(trans,axle housings.etc.). a sample is 4-11-A which means April 11,1955. The engine size is cast into block on the right side above the lifter cover. The 300 had rear light mounted on right fender, 350 was mounted on the left fender. The 300 had the key switch mounted on the right side of the switch panel, 350 had a push-button switch in this location and the key switch was mounted on right directly under the panel. Let us know what you find !

Replies:

• Re: 300U or 350U Ben in IN 05:22:47 04/12/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]