Re: What are these levers for on my 460

Posted by Nat 2 on April 10, 2006 at 06:27:59 from (64.80.108.52):

In Reply to: Re: What are these levers for on my 460 posted by Marksd on April 09, 2006 at 19:24:51:

There are adjustments on everything, but nothing could be so out of adjustment that the tractor would not move. Something is worn out or broken inside.

You can try making adjustments, but I doubt if it will help. Both the owner's manual and the I&T shop manual document the very specific adjustment procedure for the clutch and TA. It's a complicated procedure, that if done incorrectly, will leave the tractor in a state where you can't shift it.

You'll likely end up replacing the main clutch and the TA unit. I certainly hope you didn't buy this tractor; you're in deep deep trouble if you did. It doesn't sound like you have the skills or facilities to fix these major problems, and it's going to cost you a fortune to have it done professionally. If you want to learn, I would start with something smaller and simpler to work on, like a Farmall H.

Replies:

• Re: What are these levers for on my 460 dhermesc 06:37:26 04/10/06 (3)
  • Re: What are these levers for on my 460 Marksd 07:35:36 04/10/06 (2)
    • Re: What are these levers for on my 460 dhermesc 09:02:29 04/10/06 (0)
    • Re: What are these levers for on my 460 dhermesc 08:13:30 04/10/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]