Re: 560 exsaust manifold

Posted by Brownie 45 on April 03, 2006 at 05:48:16 from (207.177.82.35):

In Reply to: 560 exsaust manifold posted by Bruce Severson on April 03, 2006 at 03:42:07:

Most of the problem in exhaust manifolds involves rust between bolt heads, lockwashers, & the manifold.If you have access to a torch[or brazing carbons], try heating the bolt heads to break the rust, using common sense on the amount of heat. When this fails, try to weld a nut on the bolt head & let the weld cool. Try backing the bolt/ stud out. Option #3 involves grinding/ removing the bolt heads, pulling the manifold off, & working at the remains of the bolts with no manifold to hinder you. Good luck.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]