Re: smtad sheet metal advice

Posted by Dave Grindle on March 24, 2006 at 23:07:21 from (207.190.64.194):

In Reply to: smtad sheet metal advice posted by shoo_giesty on March 24, 2006 at 21:53:48:

Tim ......an M grill will fit , but you won't have the "cutivator brace" holes (thus it will be "cosmetically" incorrect)
MD hoods & fuel tanks are the same as SMTAD(but the M gas is not) .......the TA does NOT make the tank or the hood longer cause the extra TA length is compensated for behind the fuel tank ( there's a gap between the tank & the stearing wheel post)
the reason the MD , SMTAD & SMTA hoods are longer than the M gas hoods is in the front casting (the piece where the side rails bolt to)- this piece is about 1.5 inches longer , thus the hood needs to be longer to "reach" the grill

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]