Re: SPARK, BUT NO START

Posted by El Toro on March 21, 2006 at 03:55:29 from (205.188.116.133):

In Reply to: SPARK, BUT NO START posted by jason smith on March 20, 2006 at 19:57:27:

You need to remove No1 sparkplug and bring No1 piston to TDC on the compression stroke. While someone hand cranks the engine hold your thumb over the plug hole until you feel pressure against your thumb. Then look for the notch on the damper pulley. Slowly keep rotating engine until the notch is aligned with the pointer.

Then remove the distributor cap and see if the rotor is at the No1 plug tower. Your plug wires should be in this firing order on your distributor cap if the rotor turns CW. Hal
PS: No1 sparkplug is near the radiator

2-1
4-3

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]