Re: TA Status

Posted by Janicholson on March 20, 2006 at 18:39:11 from (66.173.50.105):

In Reply to: TA Status posted by Retcol on March 20, 2006 at 15:48:38:

I have been thinking about what you said in your post, I just need more info.

The TA will slow the tractor down when pulled back.
That is its job. Always move the lever with determination from direct, to TA, and from TA to direct.

If the Tractor pulls loads in TA, lever back,(a plow, or disk), or starts in 5th TA from a standing start without problems, and moves cleanly into direct when the handle is moved briskly forward, it is probably not bad.

All TAs need to be adjusted once in a while. The TA in our 350U is original and still operational 49 years old. (with high hours and max use plowing and working ground).

Buy a book (here on this site) to correctly adjust the linkage, it is way important.

Good luck,
JimN

Replies:

• Re: TA Status Nat 2 05:51:12 03/21/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]