Re: Timing an M

Posted by Hermit on March 20, 2006 at 16:25:37 from (69.21.48.37):

In Reply to: Timing an M posted by Wicksfield on March 20, 2006 at 10:31:22:

With a distributor-points set at .020 and breaker arm spring tension at 21-25 ounces-degrees and rpm at crankshaft:

0 degrees at 400 rpm
19 degrees at 800 rpm
34 degrees at 1200 rpm
40 degrees at 1600 rpm

From IH-8

Replies:

• Re: Timing an M the tractor vet 19:44:47 03/20/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]