Re: farmall 140 valve clearance

Posted by Hugh MacKay on March 15, 2006 at 18:24:42 from (209.226.106.9):

In Reply to: farmall 140 valve clearance posted by Greg Lasher on March 15, 2006 at 18:03:46:

Greg: The IT manual calls for .014, both intake and exhaust for all C-123 engines. I found I had to adjust my exhaust valves on 140 .016 to .018. That may have something to do with the condition of the engine. However at .014 the exhaust valves were not closing. I noticed the specs on the C135 engine call for .014 intake and .020 exhaust. I played with exhaust valve setting until it stopped poofing. That seem to be in the .016 to .018 range. That was 3 years ago and it still works fine. Not quite sure why, as my Super A and 130 work fine at .014 for both.

Replies:

• thank you Greg Lasher 02:17:32 03/16/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]