Re: Alternator again

Posted by little john on March 11, 2006 at 11:10:05 from (152.163.100.65):

In Reply to: Re: Alternator again posted by Andrew Z on March 11, 2006 at 10:04:58:

I turned the generator bracket upside down and put a long bolt thru the bracket holes and the alternator holes and it lined up pretty well with a few washers added. I used mine by just letting the alternator rest against the valve cover and finding the right length belt, but would be better to make a little brace. I've seen photos of a setup where a little pulley was added below the alternator to allow for adjustmentof the belt, but sorry to say I can't find the photo. It was a tight fit, but it works, and I had the hood on properly. I'm no expert, maybe someone else can come up with better suggestions. And maybe someone has that photo that appeared on here a year or so ago.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]