Re: i need a GREAT manual

Posted by banjo on March 11, 2006 at 07:29:43 from (65.67.203.52):

In Reply to: Re: i need a GREAT manual posted by gene bender on March 11, 2006 at 05:38:07:

scratching my head, oti?
was that supposed to be pto?
i do not think i'll be useing it with cultivators. but the tranny is quite a bit noiser than my other SA.

the oil slinger is not touching anything so i know that is not the noise. it turns easily. but after getting the pto housing off it is getting oil back to the pto.

but at the other end it would be a good time to check all the seals and bearings since i have it almost stripped down. I'm not making a show tractor just wanting to get it in shape to use.All the bearings turn easily by hand, but without a load on them i'm not sure if they need replacing.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]