Re: farmall h pistons

Posted by jeffcat on March 01, 2006 at 20:36:24 from (216.107.36.170):

In Reply to: farmall h pistons posted by waterworks dan on March 01, 2006 at 20:13:30:

Just make sure you have a real good crank-bearings- caps- and head. It is more power and more strain on your engine. Not a whole lot but sometimes a tiny bit will do it. Check for the clearance between the head an piston with the head a little loose and hand crank it over. Also consider that it may push up you octain needs. I know most of this I piked up from doing car engines but have seen run on troubles and such with tractors. Fixed one of the tractors with two head gaskets. My 2c. Jeffcat

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]