Re: H4 International Magneto on a Farmall M

Posted by Bob on February 28, 2006 at 22:29:42 from (64.21.249.40):

In Reply to: H4 International Magneto on a Farmall M posted by FMS-KS on February 28, 2006 at 18:42:25:

I doubt the rotor being a bit loose is causing your miss, as I have seen a lot of those mags with a loose rotor that run fine.

You can replace the rotor, and possibly even the fiber shaft, if it's worn, too, OR you can put a little dab of silicone sealant between the rotor and the shaft. When it hardens, the play will be gone, yet the rotor could still be pulled of later, if needed, because the silicone will let go without breaking anything.

Replies:

• Re: H4 International Magneto on a Farmall M FMS-KS 21:38:56 03/01/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]