Re: #!@*$# handcrank !

Posted by retired farmer on February 26, 2006 at 19:07:26 from (207.200.116.5):

In Reply to: #!@*$# handcrank ! posted by Tom F on February 26, 2006 at 14:09:33:

I used to use WD-40 and all kinds of other penetrating oils with varying degrees of success, until last summer. I found something that hasn't failed me yet on loosening rusted parts. Go down to your local NAPA store and get several spray cans of CRC carburator cleaner. Put the long tube nozzle on the can and keep spraying it on the parts, maybe four to six times a day, sometimes it takes a few minutes or maybe a couple of days, depending on what is rusted. It hasn't failed me yet and I have tried it on some nasty stuff.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]