Re: adjustment

Posted by Bill Geer on February 23, 2006 at 21:25:49 from (216.157.203.35):

In Reply to: adjustment posted by randy on February 23, 2006 at 05:28:21:

Randy;
If I was smart with this computer. I would scan and mail you the page out of my 154 manual.
Any how here we go.

Remove frame top cover.The clutch linkage should be adjusted to provide .090 inch clearance between the release fingers and the bearing. Adjust by loosening the two nuts on the clutch rod adjusting yoke and positioning the clutch adjusting rod to give the specified free travle. Retighten the nuts.

PS there is also a clutch brake on this tractor. If it is out of adjustment it will grind ever time you shift. This is in the manual.

e-mail me if you have any more questions.
[email protected]
Hope this helps BILL

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]