Re: paint procedure

Posted by Dave BN on February 21, 2006 at 16:38:04 from (64.12.116.65):

In Reply to: paint procedure posted by fritzscub on February 21, 2006 at 10:24:16:

As stated you can paint most parts while apart and put finish coats on after final assembly. Be careful not to paint parts that need to be a precise fit or need to make metal to metal contact. Starter to torque tube, or instrument to dash for example as some of these use the castings for ground connection. Dave.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]