Re: a,b,c waterpump

Posted by Hugh MacKay on February 19, 2006 at 14:35:48 from (64.228.11.36):

In Reply to: a,b,c waterpump posted by d masters on February 19, 2006 at 13:39:59:

d masters: Any of the water pumps off C-123 engines in SC 100, 200, 130, 230 will bolt right up to the C-113 engine in the A, B, SA or C. They will also match up coupling to the rad.

The problem you may encounter is a thermostat at the top. If you listen to YT discussion that is the hard part, most claim there is not room between top engine port and top rad port. I can't see that being a problem if you use a thermostat like my 130 has. It is inline unit within the top hose, held against top engine port by a pipe type sleeve about 1' long and inside the hose, clamped in place by a 3rd clamp around the hose. I know my SA would have room between top engine port and top rad port to install the same.

Replies:

• Re: a,b,c waterpump d masters 15:24:22 02/19/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]