|
Farmall & IHC Tractors Discussion Board |
Re: 1066 Left brake parts
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on February 16, 2006 at 07:43:13 from (66.202.111.170):
In Reply to: Re: 1066 Left brake parts posted by Michael Sheik on February 16, 2006 at 07:23:49:
Ok here is the deal the ones made here in the good old US of Aare non asbestous and the ones that you can get from WHONG HUNG LOW are asbestous and are a couple bucks cheeper and they do stop better till the bonding comes loose or the spot welds break and this has happened on both the US made ones and also the imports , now at the friendly local Case I H store the Heavey Duty ones that they sell can fit from the 706 thru the 1066 and are of the Metalic comp. and are a bunch more bucks and they do last longer but as with any Metalic brake mat. they are a bit harder on the plates and drum and they do seam to stop a littel better. But since i am cheep i use the Import stuff and just replace a littel more often that way there is less wear on the hard parts. My buddy is the one that is the hardest on brakes because he will not lift the disk at the ends of the fields and ride the he double lo out of them tryen to make a hard turn and i keep tryen to tell him that one of these days we will be doing not only the brakes but also the spider gears and case . So realy it is up to you on just what linning ya want to use and just how muck ya want to put into the brake job. Myself i like to keep at least two disc and one seal pkg on hand for those OH SHUT days when you are in a rush that way it is a quick trip to the nail on the wall then the drive to the parts counter and standing in line for and hour just to find out that the guy you just past going out the door got the last ones.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Farming Never Left My Blood - by Stan Gordon. I was born in 1947 youngest of ten of a working farm. Our farm was located in Saskatchewan near Saskatoon. We had a mixed farm consisting of grain and dairy all done with old machinery and by hand. My dad had a tractor, a Farmall A which was used mostly to run the thrashing machine, a seed drill and for plowing. I remember locals used to help each other and threshing was done from daylight to after dark, one farm to another until all farms were done.
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|