Farmall Tractors Discussion Board |
Re: Re: Farmall C 12 volt conversion
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Brian Schmidt on January 08, 2000 at 16:12:00 from (216.178.176.16):
In Reply to: Re: Farmall C 12 volt conversion posted by RedTed/MO on January 08, 2000 at 15:49:41:
If I ever buy a tractor that is 12 volt, I will convert it back. Frankly, the alternators don't turn fast enough at idle to keep the battery charged. I have compared several charging charts for delco and other models of alternators. Most of them don't really start charging until they reach 3000 RPM. That is shaft speed. Can't seem to find a pulley for the alternator that does not require one to have to change the fan or crank pulley. There is really nothing wrong with the 6V systems anyway. Headlights mainly. I put sealed beams on my C and they are brighter than my dads Super C with halogen bulbs under the stock lenses. Brian
Follow Ups:
Home
| Forums
Today's Featured Article -
Ford Part Number Trivia - by Forum Participants. "Replaced by" means the part was superseded. All of my part books date back to 1964 and New Holland have changed some part numbers. They usually put the old Ford part number on the package. I was suppressed when I looked up the part number of the auxiliary drive shaft because for some reason the part number went through a radical change and it lost its "Basic Part Number". Ford part numbers follow the following rules. Most part numbers are in three parts. The middle part is called the
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|