|
Farmall & IHC Tractors Discussion Board |
Re: Farmall H with belly mower
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Hugh MacKay on February 08, 2006 at 07:56:43 from (209.226.106.171):
In Reply to: Re: Farmall H with belly mower posted by Nat 2 on February 08, 2006 at 05:06:04:
Nat: I never suggested the Super A lacked any power, in fact it will give both my 130 and 140 a hard run in 2nd gear pulling my 17 tooth S-tine cultivator. By the way those cultivators require 1.25 to 1.5 hp per tooth. In fact not to long ago I hooked up to an implement that was making a Deere 2355 put out black smoke at about same speed as SA in 3rd gear. I pulled that implement in 3rd gear. Don't think there is much wrong with my SA. What I did say, was that unless the mower blades were razor sharp the belt and pullies would be hot when done mowing my acre. Now don't come back and tell me my belt is loose, or I will pick you a tune of turkey in the straw on the belt. Now I will admit I don't mow my grass as often as most folks, and I also have my mower set so blades are 4" off the floor in my shop when in mowing position. I always let my grass get 6-7 inches high before mowing, precisely why I have healthy looking grass always. I am constantly asked by folks why their grass looks poorly. I tell them they would look poorly too if wounded as often as they wound their grass. Besides a 4" lawn will not burn up as quick in dry weather.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
The Mud Daubers and the Old John Deere - by Jon Zehnder. I have a 1941, John Deere Model A tractor I have owned for about a year and a half. This is my first (in case my wife reads this, "FIRST") tractor and it has been a learning experience. After considerable advise and assistance from local tractor nuts and the forums of Yesterday�s Tractors, I had finally got it running pretty well. I have tuned it up, overhauled the carburetor, installed a borrowed, rebuilt magneto, installed a new Power-Trol, patched the radiator, installed new front wheels a
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|