|
Farmall & IHC Tractors Discussion Board |
656 Ring gear , can it be flipped?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Yellott Canby on February 06, 2006 at 12:23:55 from (4.131.34.135):
Hello, Was wondering if the ring gear on a 656 gas can be flipped when one side gets bad or if the gear is only good to use on one side. Had a friend over this weekend, another red tractor fellow. Decided to change the ring gear on my 656 as it would grind all the time when trying to start. Was going to replace it but heard that it could be flipped if it hadn't already. When we removed the gear it was badly worn on one side and flat and unused on the other. However when it was all reassemled, with a rebuilt starter, It would grind still and also the starter would hang up and we couldn't stop it until we unhooked the battery. Thought the new starter might be bad but it tested ok.The starter man said that the flywheel has to have a slight bevel to the gear in order to work, which it didn't. Do I need to replace it with a new one?Thanks for the help.YC
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
More Memories of a Field Service Engineer - by Brian Dye. Introduction: The author worked for one of the largest Ford tractor dealerships in England as a trouble-shooter on tractor engines, hydraulics and combine harvesters from 1963 to 1972. In 1972 he became a dealer manager and finally left the dealer net in 1975 to run his own electronic design and manufacturing company. [Editor] We live right in the middle of Norfolk. The dealership that I worked for sold Fordson Tractors from the 1920's and some of t
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
