Re: Case question for farmall fans

Posted by Janicholson on January 29, 2006 at 15:03:37 from (66.173.50.131):

In Reply to: Re: Case question for farmall fans posted by RustyFarmall on January 29, 2006 at 14:20:51:

I would heat the pump to well above ambient temp with a blow dryer. Don't get it hotter than it would get running, but heat might do it. Varnish from old diesel will sure gum up a pump. If it runs, but is stuck at one (not excessive)engine speed with no governor control, I would let it run for an hour or so (driving it around if possible) to see if it will break loose.
Operating the engine for one hour/yr is horrible on it. Use it to mow, or do work, maybe even pay someone to work it for two to three hours a month. It will pay for itself in reduced effort to get it running, and stay healthier longer.
Just My 230$, JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]