Re: 460 steering wheel

Posted by Janicholson on January 29, 2006 at 08:00:50 from (66.173.50.90):

In Reply to: 460 steering wheel posted by Broomstacker on January 28, 2006 at 20:11:40:

I can't believe it would be metric, and there are only two sizes that are in that category. 3/4 with a major diameter of .750, and 7/8 at .875
http://www.sizes.com/tools/thread_american.htm
is a ref.
One very possible reality is pounded 3/4.
That means it was 3/4 but someone pounded the end till it was shorter and fatter.
Using a 3/4 nf die on the shaft may be necessary.
JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]