Re: Farmall H carburator

Posted by North M on January 20, 2006 at 13:55:08 from (142.165.91.246):

In Reply to: Farmall H carburator posted by Skip on January 20, 2006 at 12:41:34:

I was having the same trouble with a farmall H
I finally did some pipefitting together to form a trap for sediments and solids. I put a 1/4 inch nipple at the bottom of the tank, screwed on a tee, and then added another nipple, 90, nipple and 1/4 " ball valve on the end. This allows me to quickly flush the system out and provides a way to trap solids or contaminents. off the tee I added on the sediment bowl and connected it to an inline filter and then on to the carb. I had steamed out the gas tank but it still had some problems. This saved me a lot of trouble with the old H. Good Luck

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]