Re: I need a mesuring tool.

Posted by BillWV on January 17, 2006 at 18:12:14 from (129.71.136.121):

In Reply to: I need a mesuring tool. posted by Kelly C on January 17, 2006 at 15:28:20:

You can practice with a micrometer by using a feeler gauge (a known thickness) and setting the mic to that thickness and feeling the drag. As one of the other posts says, it is a skill and must be practiced to use a micrometer consistently.

Just because a caliper will read to a certain precision doesn't mean it is accurate to that extent. Need micrometers for better precision.

I learned a lot about precision measurements when reloading for target rifles.

Good luck,
Bill

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]