Farmall & IHC Tractors Discussion Board |
Re: 140 or is it???
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Hugh MacKay on January 15, 2006 at 02:05:01 from (216.208.58.145):
In Reply to: 140 or is it??? posted by hassan fortney on January 14, 2006 at 17:16:15:
hassan: To begin with the 140 was in production from 1958 until 1979, and maybe even a few in 80. It started off with the same grill as 460-560, etc. That changed in mid 1963 to the same grill as used on 504 and early 656. Near as I can tell it never changed after that, at least not until after 1975. Yes the decals did change a bit but I don't think the sheet metal or grill changed between 63 and 79. I have a 1963 model with the 504 type grill. I also have 1968 and 1975 buyers guide and each and every one of those have the same sheet metal and grill. I have looked at countless numbers of these tractors, and have never seen any differences other than the 58 to 63 models. With the 58 to 63 it is actually only the grill different from post 63 tractors, the sheet metal is the same.
Replies:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|